| I spent all day yesterday with Mom & Dad. helping w/Dad's heallth issues. Today it was back to work on the panel & wiring. 1st |
|
| thing was to secure the Throttle, Prop, Mixture cobtrol cables to the subpanel support using some DG4 clamps. Then I made the |
|
| J1 harness/connector for the Shadin ADC (OAT). Then connected the pitot & static lines to the Dynon D10A and then connected |
|
| the harness to the D10A. There was a 'Keep Alive' lead that got connrcted to the Main Batt Buss. Also a case ground that got |
|
| connected to the ground 'forest'. Next step was to attach a 15 pin dsub to the Crossbow 420 AHRS to connect it to the panel. |
|
| Along the way I tried to 'tidy' up the behind the scenes panel, using tywraps to keep lines from chaffing and rubbing where |
|
| possible. I was hoping to have a much neater/organized environment here, but it just didn't turn out that way. I'm going to test |
|
| everything befor installing the center console because when it's installed, it will severly limit access to everything behind/under |
|
| the panel. Last item today was to connect the pilot NACA vent to the eyeball vent. I had topick up another 4 ft of Scat from |
|
| Aerozona. Tomorrow I should get the co-pilot connected. Another day or two connecting the panel and I should be ready for a |
|
|
|
