Been down with a cold the past couple of days, beginning to get back to normal. Also stunned by the news of Dan Lloyds death. |
|
Makes one want to be as careful as possible and not to rush with these 'finishing' details. I repacked my AeroComposite prop for |
|
shipping for service. Wayne Eggerton had an issue with his prop blades sticking. They put out an advisory notice to avoid ops in |
|
high temps. Unfortunately that's not an option in AZ. A call to Aero Comp resulted in them having me return the prop to |
|
remachine the molded poly parts on the blades to provide a better clearance and allow for the heat & expansion. Great customer |
|
service ! All on their nickle. Fortunately I have enough time that this should not hold up progress. Meanwhile back to wiring the |
|
panel. I rerouted the Starter Engaged LED lead to the other side of the firewall. I connected the Fuel pump to the switch, the |
|
clock to the Batt Buss, and connected the Main, Aux, and Crossfeed contactors to their respective switches. Still remaining: wire |
|
the Crossbow AHRS to the panel, Connect the Dynon D10A harness. connect Nav & tail lights. Pitot and static for D10A. and |
|
then install and connect center console. |
|