| Short day today, coming down with a cold (groan). Pretty much finished up connecting everything on the Right side ofthe panel |
|
| to the sub-panel. I picked up some more connectors, Fast-on, BNC, and Molex from Aerozona this am. One of the cables from |
|
| the panel to the JPI EIU was too short, so I made a 10" extension w/Molex connectors each end. Next task was to connect the |
|
| power wires that didn't get circuit breakers to the appropriate Main/Auz fuse blocks. Picked up some fuses from Checker Auto. I |
|
| needed to connect the Transponser Antenna coax from the antenna to the GMA 327. I ended up removing the center stack |
|
| moodule in order to get e3nough room to make the connection. The last item was to cut & crimp a BNC connector to the Com2 |
|
| anetnna coax and then attach to the pigtail on the back of the radio stack. While upside down under the panel. I tried to secure |
|
| as much 'loose' stuff as possible using a combination of tywraps. Dispite my attempt to keep things 'neat' there's no way I get a |
|
| passing grade on the 'behing the panel' maze. I really hope that bench testing everything twoce pays off, cause, I really DON'T |
|
| want to trouble shoot problems back here! the only thing that needs to be connected on the Right side is the Nav Antenna, after |
|
| the wings are connected. (I might just make a longer pigtail to get out from behind the panel) |
|
