| Spent the biggest portion of today (and some of yesterday) drafting the panel graphics in MS Visio. It's a reall series of back and |
|
| forth trial and error fittings, but I think I finally got all of the lettering and graphics done. The final test was to print them all on an |
|
| overhead slide, and place them on top of the actual subpanels they will go on. They look all right tonight, I'll double check |
|
| tomorrow. I found a local guy who will make/burn my silkscreen, and I found out I can get the ink color matched ($60!). So |
|
| hopepfully tomorrow, I'll drop off the positive for burning and Tues or Wed make a trip into town to order the ink. I decided that |
|
| the 'lines' on the cowl ram air mod were not optimal, and so I added several layers of Super Fil tonight to let it cure for sanding to |
|
|
|
