| With the Flox base cured overnight, I sanded that flush with the upper cowl, and then began filling and sanding w/ Metal Glaze. |
|
| The Flox mix wa a little dry so there were several voids in the surfae even after sanding. Generated a lot of dust again, but that's |
|
| what happens in this stage. I'm glad I did this , even though it will 'hide' the rivets and willl lokk loke a Glass plane on the upper |
|
| portion of the fuse, the aesthetic improvement in the forward portion of the plane is well worth it! It's 103 today, so work occurred |
|
| is several intervals with dashes indoors for cooling and hydrating. Tomorrow, I'll pop the upper cowl off and true up the edges |
|
| where they were joined and then apply some Smooth Prime to the upper fuse and reapply to the cowl where it got sanded during |
|
|
|
