| More of the same today. Began this am by pinhole finning the top fwd sectin of the cabin cover. Same method as before two |
|
| coats of Smooth Prime squeeging in between with a credit card and letting dry in between coats. Best pinhole method I've seem. |
|
| Then shifted to priming the door jams. I put 2-3 coats on the door jams using a sponge 'brush' it's not perfect but I didn't want to |
|
| use a sprayer in the initial coats. I've got the right door to the point where I can now spray some light coats on using the sprayer |
|
| and then final sand using 220 -320 grit. At least that's the plan. just before shutting down today I tried 2 different versions of 'DIY |
|
| spray cans from the hardware store but both were junk. So back to the compressor and the touchup gun tomorrow. |
|
