| Nothing remarkabke about today, just more of the same flling & sanding. Te hinge recess pockets are a challenge and take |
|
| quite a bit of time. Also before taking the doors off, I rechecked the gap/seam between the doors and cabin cover and made |
|
| some minor correctioins in a couple of places. I'fe filled and sanded ALL of the cabin door jams on both sides. the last thing I did |
|
| tonight was to take some 320 grit and try and put a 'consistent' radius on the edge of the door kam perimeter. Tomorrow I'll get |
|
| back to priming, working on the door jams, They are a challenge to sand dure to the compound curves along with the 'sharp' |
|
| edges. those and the windscreen are the remaining items on the cabin cover to be primed and sanded. Still need to finish off the |
|
| doors. Also notinced that on one of the doors the filling I did around the delrin blocks began to loosed, so I think I'll need to put a |
|
| lay-up over those and then prime the perimeter of the doors. |
|
