| Finished the filling and sanding of all of the rivet heads in the aft cabin, Put a fillet between the aft bulkhead and the cabin cover. |
|
| Next step is to prime it w/ Smooth Prime and sand (ugh!) it prior to paint. I've been thinking about how to finish off the rear seats |
|
| where the arm rests are. I've decided to make some fiberglass panels that will fit between the longerons and the 'armrest' and |
|
| between the door jam and the seat back support. I had hoped to wait and do this after flying, BUT.. it's Soooo messy with all of |
|
| the filling/sanding/ etc/ I figured I might as well get the panels made while I've still got the cabin covered with dust. Attaching th |
|
| epanels will require I install some nutplates, and I want to do that befor painting. So tomorrows task is to tackle the side panels. |
|
| The local supplier of Smooth prime won't have any stock until Mon. anyway. So it looks like the actual painting of the interior |
|
| won't take place until next week. |
|
