| Started out today hitching a ride in Bill Korolick' 7A for a flight with 3 other RV 7's down to CHD for some breakfast. Bill let me fly |
|
| both ways, TO & Landings. What a Guy! THANKS BILL !!!! I owe you. Once back at the hangar, I jumped back on the interior |
|
| side panels, yesterday I played around and got a pattern for the left side, only to find out that my lether wasn't long enough, so |
|
| I've divided the side panel into 3 pieces. 1. Footwell, 2, Doorwell, and 3. Rear seat. I'm using some chip board with some thin |
|
| foam glued to it. I'm using some spray adhesive that I got from the Fabric discount store, That's is similar to Sticky Stuff From |
|
| ACS, only 1/2 price. I'm also using the same edge binding that I used for the carpets to bind the upholstery panels. I tried super |
|
| glue, but it didn't hold, so I'm reverting to Monkey Snot (aka PlioBond) contact cement, which seems to be working fine. insttalle |
|
| dthem all with the last bit of my Velcro. I finished the 2 front footwell panels, and the pilot side door panel. tomorrow , the Copilot |
|
| side panel, and then the rear seats. |
|
