I finally got the garage washed out, and all (most) of the dust settled. I even used Judy's duster to dust the airframe and wings! I |
|
remounted the Horizontal Stab, and found out that the ELT antenna wil NOT fit in the location I have it mounted, I'll investigate |
|
the possibilities of a "rubber ducky" to see if that's an alternative, I'm certainly NOWHERE qualified to design/make antenna |
|
choices so this should be interesting. Remounted the Vertical stab as well, and then went searching for the various parts that will |
|
be needed, (I haven't touched these pieces in over 1 1/2 years!). Fortunately I found them all! I cut the rubber gap seal material |
|
to fit the closeout piece under the Horiz stab and then clecoed the lfet and right pieces in place. These actually fit very well and |
|
provide a nice weather/water seal. I slipped the fiberglass fairing on just to see how the initial fit ws, and it looks pretty good, |
|
hopefull the trimming and final fiting won't be a bear. I'm recovering from a cold that's gone thru the family and didn't get a lot |
|
done today, More to come tomorrow. |
|