| Filled and sanded all of the remaining 'dings' on the Rudder, Vert Stab, and Elevators. Then Brought the Horizontal stab down |
|
| from the garage wall for the 1st time in 2 years, and Tackled it. For some unknown reason, I failed to rivet one side of the left |
|
| fairing, so 4 CS 4-4's and we were good to go. It's a bit funny/revealing to pick up these parts after not touching them for quite |
|
| some time, You can visibly see the improvement in skills, as witnessed by a diminishing number of 'dings' in the later parts. (I'm |
|
| hoping the wings will be MUCH better!). Had to run to the paint store and pick up yet another kit of Evercoat Metal Glaze. (0 % of |
|
| this stuff ends up as dust, but is sure does the trick for filling and bonding to fiberglass and alum. I got the top side of the |
|
| Horizontal stab filled and sanded and a couple of dings fixes as well. Tomorrow, the bottom. |
|
