| An unremarkable day today. The weather cleared overnight so Today was spend filling and sanding the Left Wing Tip. Used |
|
| Evercoat Metal Glaze to fill/blend around the lens cover, and also to 'cover some of the rivet lines where the closeout piece is |
|
| reveted in. I also had some bubble/voids in the fill material in the close out that needed to get filled. I completely sanded the |
|
| Gelcoat w/ 100 grit, I'm debating wheather or not to add a coat of Smooth Prime to the wing tips, There are virtually NO pinholes |
|
| in them, and other than some sanding scratches which will get filled with a fill/primer and then sanded at paint time, they should |
|
| be about ready for paint. I need to do some filling inside the lens cover recess where the 4 additional nutplates/rivets that I'm not |
|
| going to use are. I will paint the inside of the lense cover with a metalic silver or perhaps even the same 'chrome' paint as the |
|
| spinner will get and the nutplateholes won't show, but I'd like them to be hidden nonethe less. |
|
