| Another hot day in the Valley of the Sun, Managed to mount the Naca Vents for the panel eyeball swivels. I took some |
|
| measurements and if I got it correctly, I'll be able to use the std 2" scat tube doubled back and then attached to the panel vents, |
|
| at least that's the plan. Used some Proseal to glue them in place, then used 3 CS4-4's in each to hold them in as i've heard of |
|
| them popping of on one builder. Recived the polished 3" induction ring for the colw from Rod Bower today. He has Dave |
|
| Chazachorowoski make them for him , and they are the same high quality as the rest of his work. Sanded the opening in the |
|
| lower cowl so that I could press fit the ring into it, and then used duct tape to hold it in place, turned it nose down, and mixed |
|
| some flox which I pourde around the ring, then took a popcicle stick and made sure there were no air bubbles trapped in the |
|
| ring. In this heat it cured in minutes! EAA mtg tonight, and the Kids arrive home from School for a visit tomorrow, so things mght |
|
|
|
