| Got off to a good start today. David McNeil another -10 builder, flew over from FFZ and picked me up @ DVT in his Glastar for a |
|
| trip up to PRC for some breakfast. We had some gusty winds today and the ride up was a little bumpy, but the ride back was |
|
| better. THANKS Dave! Back @ home, I finished installing the baggage compartment light and it's switch. Cut a hole in the |
|
| Ohead for the switch and enlarged it to size using hand files. Made a trip to Auto Zone and picked up an inline fuse, installed a |
|
| 2amp fuse in it then combined the Ohead light and the front and rear seat circuits into a single circuit that will be driven off the |
|
| bus attached to the Aux battery, and we're in business. In order to wire the headsets and mics for the rearseaters, I needed to |
|
| splice on some additional shielded wires to the ones coming off the audio panel. Added enough to each (R&L) mic to reach the |
|
| rear seats. and then spliced two added cables to the 'pass' headset cable coming off the audio panel. I'm not sure exactly how |
|
| I'm going to route the Left side rear pass cable from the right side yet, maybe back and across inside of the rearseat |
|
|
|
