| More items preparatory to panel install. 1st off I found, a problem with the wiring for the Pilot and co-pilot Mic and headphones. I |
|
| had soldered the cable shield to one of the connectors. I originally had been following a schematic from a Micronair installation |
|
| which was not wise in this case. Additionally I needed to add another wire for Pilot and co-pilot PTT. I also added the |
|
| markerbeacon antenna to the GMA 340 audion panel. I used some of the RG 58 coax, mounted a couple of high density pins to |
|
| the center conductor and to the shield and installed them in the 340. I made a trip to the airport/hangar to pick up some of the |
|
| surplus Pilot GREEN tubing to complete plumbing the pitot/static system. The parts from MSC arrived today. I installed the brass |
|
| 'instant' fittings on the encoder, ADC, and Dynon D10A . I had some difficulty installing them on the TruTrak A/P. I posted a |
|
| query to Matronics and received some useful info. The brass fittings were wrapped w/ teflon tape which contributed to making |
|
| them too large for the TT install. Finally I was able to get them installed without stripping the threads. I bought a new IPOD |
|
| NANO 8gb, instead of a cd. Wow these things are terrific!. I wired a jack to the co-pilot subpanel using the music cable wired |
|
| from the GMA 340. We'll have tunes in our ears as we fly! |
|
