I finished up the XM weather installation. The problems I had were due to not having activated my own account. with that done |
|
Thurs pm. Fri. powered everything back up and it works. Initially I had a problem with reception but I believe it's because i'm |
|
using 50ft of rg58 for antenna, and the db loss is too much. Since OP Tech doesn't support all of the overlays yet, I opted for the |
|
Aviator LT package, I can upgrade when/if OP makes the enhancements. I fixed some 'bugs' in the dimmer circuit, and added |
|
some 'miniturized' d-sub 9 pin connnectors to the 26 awg Ray allen trim indicators. I used the method in Bob Nuckols |
|
AeroElectric connection. Sat I set out to wire the annunciator panel lights. I've got each respective light wired or labled/tied off to |
|
it's source. The next task was to complete the wiring harness for each of the rocker switches. That required a quick trip to |
|
Aerozona for more wire! I also wired the Starter/Crossfeed; Main Master; and Aux Master switches. I've labled and routed all of |
|
the wires to either the left or right side and have the left side all tied and secured w/ Ty-wraps. There are a couple of sub-bundles |
|
that don't go left/right but go to components mounted on the upper fuse subpanel. Those got tied into bundles and labled to get |
|
connnected when the panel gets physically installed. |
|