| On Tues. Bill derouchey flew his RV-10 down from Prescott, to look over my project for me. Bills got 250 hrs on his bird, and I |
|
| asked him to give my plane the fine tooth comb. Good thing we found several items. 1. A loose hose supplying the fuel servo!2. |
|
| A loose expansion clamp on a heater scat tube. 3. Binding of the ailerons. 4. Problems with the stall warning. 5. Roll servo not |
|
| functioning. 1, 2, & 3 got fixed as he/we found them. I spent yesterday and today debugging the stall warning. It would only work |
|
| when the NAV lights were turned on?!? Long story made short after too many trips under the panel upside down. There's a |
|
| problem with a loose ground on the stall warning buzzer, and the power leads to the Stall warning switch and the Nav light got |
|
| switched, Sounds simple enough, but I had to open up the side panels, and track wires from the wing tips back to the switches. |
|
| I've got the wires straightened out now and the stall warning ann Nav lights work as they ought to. I still need to reattach the |
|
| warning buzzer, and reinstall the closeout panels. Monday i've got Wade coming to do Weight and Balance. Need to pick up |
|
|
|
