Today I met with the neurologist for a follow-up and a current evaluation to send to the FAA for Special Issuance. He said that |
|
everything was Great and no need for any further diagnostics (CT scan). As soon as he gets his write-up to my AME, we can get |
|
things sent off to OK (FAA). I found the remaining landing light lens and bracket, And so I installed it and the wing tip lens cover |
|
on th eleft wing. It took a bit of polish and Prist to get these clean as they had been 'stored' for quites some time. I used the |
|
remainder of the afternon to clean out the hangar. It is the 1st cleaning since moving in from the south side. I've got most of the |
|
parts on the airplane now and needed to rearrange the remaining items and the wing cradle (awaiting Kelly). I've still got a bit of |
|
adjusting to do on the ailerons. I also picked up some Stainless Steel 8R8 screws from Aerozona, so that I can attach the bottom |
|
wing root fairings. When I returned home I found the Matco axel spacer and bearing preloader kit. If I can find a way to jack the |
|
nose tomorrow I'll get those installed. |
|