| Finished up the paint prep on the two forward fuse side panels today. Used MEtal Galze to contour the fiberglass and blend it to |
|
| the .020" alum. Then applied several coats of Smooth Prime to fill any remaining pinholes. Sanded that w/ 150 grit. Then |
|
| scotchbrited the alum panels, cleaned everything with acetone, and shott a couple of coats of SW 988 rattle can primer. After the |
|
| primer was applies I see the need for some touch up on the pilot panel. I'll let everything dry well over night and then touch up |
|
| the one panel and then prep the surfaces for the interior paint. |
|
