| Installed both of the Comm antennas, and then checked the radios in the cockpit. Everything COM wise seems to be working |
|
| fine along with the intercom. I picked up a couple of different baggage door seals, One from Aerozona, which was black |
|
| neoprene, BUT the adhesive strip wouldn't peel off without pulling the adhesive from the rubber, rendering it useless. I also |
|
| picked up some EDPM from Lowes. It is a double 'bulb'. I split it into a single bulb and then installed on the baggage door. The |
|
| Baggage door sits a little proud. It will do fro now, I may replace it down the road. I received some 2024 alum sheets from ACS, |
|
| I'm going to use these to fab some closeout panels for the pilot and copilot fuse sides underneath the panel. I made a paper |
|
| template, and then transferred it to some upholstery cardbord. I temp mounted the finerglass closeout I previously made, I have |
|
| a 'joggle' where the fiberglass meets with the cardboard, I've figured out how to blend them together. Tomorrows task. I'm also |
|
| going to replace the cardboard with the .020 2024 sheets, when I've got the final size and shape nailed down. When they are |
|
| finished I will upholster them and add a pocket to each side. |
|
