The plan was to have the fuse back from the painter and begin serious final assembly this weekend, But....... Rob's not finished |
|
repainting the prop, and it and the fuse won't be back until Mon (??). But I had to make the trip to the hangar and try and do |
|
something, so I decided to remount the LED & Strob hardware in the newly painted wing tips. I need to do thi in order to get |
|
some measurements so that Rob, can paint a matching border on the lens covers that covers up the mounting flange and the |
|
LED& strobe mounting plates. I couldn't resist temp attaching one of the wing tips to a wing (See Picture ). Back At home, I |
|
pipcked up a 12V DC power supply and connected it to on of the Op Tech EFIS units, and installed the latest software that I |
|
downloaded from their site. I spent a couple of hours beginning to get refamiliar with the new software. There's some major |
|
additions to this software version, and some user interface changes. |
|