| Added another layer of micro to the front reglassed area of the plenum, then sanded it flush. remounted plenum to engine, and |
|
| added micro to areas under the intake rings to seal them. Previously had applied release agent spray to affected metal areas. |
|
| After that cured, sanded to blend into remaining plenum, Filled the larger voids that are visible w/ micro, Mixed up a couple oz of |
|
| smooth prime, and squeeged it into the entire plenum to fill the bulk of the pinholes, Sanded it after drying w/ 100 grit, and then |
|
| sprayed the initial coat of smoothprime on the plenum. That's it for today, let it dry onight and spray and sand remaining coats |
|
|
|
