The modified Engine mount from Van's arrived. After unpackinh it, The modification looks to be Great! I asked Scott if he's make |
|
the 'bent piece wider that he did on Tim Olson's and it looks like they got it as wide as possible while still leaving enough of the |
|
old ross member to weld on to. They also didn't mess up th Powder coating, I masked off the existing powder coat, took an |
|
emery cloth to the new un primed piece, widped it all down w/ acetone. and then shot some rattle can primer, I put about 3 coats |
|
on and let each coat dry in between, Then I sprayed some RustOLeum closs white over it all, Looks pretty good. I'll let that |
|
harden overnight and then tomorrow we'll try once again to get the engine hung. (After remounting th engine mount and nose |
|
|