I 'treated' myself to a golf game this am w/ 3 other friends, nice to have a little break from building. BUT when I got home a |
|
change of clothes and then out to the garage. I drilled and clecoed the side hinges to the upper cowl on both sides. Everything |
|
stayed sight with the clecoes in. then I removed the top cowl, and countersunk the aft edge and prosealed and riveted the aft |
|
upper cowl hinge. then countersunk the left side of th upper cowl and prosealed and riveted the side hinge to it. I'll feel better |
|
when this is all riveted and it's STILL tight, but so far it's looking good after getting off to a rocky start. I ordered a hiden hinge last |
|
week which should arrive in a day or two. I'd like to ohide the latch land use a remote cable to activate a pull pin ala Scott |
|
Schmidt, but with the James cowl and plenum, there's no way to mount the pull pin cable as the intake openings in the cowl are |
|
directly coupled to the underside of the plenum. I'll keep noodeling on this, my back-up it to use a either a Hartwell latch. or a |
|
|