| Trimed an filed the retainer ring on the oil door opening. rounded the corners on the oil door itself. Clecoed on the hinge, and |
|
| then wrapped the oil door in Saran wrap (release film). Mixed up some epoxy and colodial silica and squeeged it into the gap |
|
| between the oil door and the opening. placed some weights on it to hold it flush, and then put it under the Halogen lights so it |
|
| would set up. After setting up, sanded everything flush w/ 100 grit. it came out Great! too bad I can't leave it like this because the |
|
| gap has disappeared. Unforunately i'll have to sand the door itself a little in order to provide for paint. Still waiting on the Cam |
|
| Loc's to arrive. Spoke w/ Ed Hayden and he's heard about a hidden latch that used a magnet to lock and un-lock it. I'll hold off on |
|
| installing the CamLoc's until I can investigate that. |
|
