| I got a tip from another -10 builder re shimming the Left door, apparently several other builders have had to do the same, I |
|
| experimented wiht some an washers and found a combination that brings the door up even with the Cabin cover, With that done |
|
| I gave everything a good sanding to even the flox filler that I put on Sat pm. there are still some low spots both on the doors and |
|
| on the cabin cover frame, some are caused by the clampng pressure when trhe doors were initiall fit to the cabin cover, and |
|
| others ????? anyway, looks like this will save a day at least due to not needing to wait 8 hrs on epoxy to cure/harden. I marked |
|
| the low spots with a sharpie and then applied some more flox mixture to then so it can cure overnight, Also didn't have to remove |
|
| the doors to do this which saves some more time. Also touched up a few places on the Right door frame. |
|
