More of the same, did the initial sanding of the Left door, then removed the door, this door sits lower than the cabin top in a |
|
couple of places so it's going to require several tape/fill/sand cycles to get them booth at the same level and smooth. After the |
|
initial sand I mixed up the goop and applied to the cabin areas that needed some build-up. have a couple pf places on the right |
|
door (not shown) where I also did smoe minor build-up's after they are cured that should do it for the Right door frame portion, If |
|
this sits up hard enough tonight I might be able to get another sanding done on it and then get another build-up applied so it can |
|
cure/harden on Sunday. We'll see. |
|