| More finishing up of Sec 44. Fabricated the right and Left fuel vent lines. Also fabricated the fuel supply lines and fitted then to |
|
| the lines which feed the Andair valve. (not pictured here). I still need to cut the end which attaches to the fuel tank to final length |
|
| and install the AN fitting and flare, but that will wait until final assembly after paint. Next I'm trying to gett all of the fuse to wing |
|
| connections sorted out so I can make the appropriate holes in the fuse sides for the wires/tubes to pass through. In the process |
|
| of doing this, I installed the other half of the modified dsub for the RAC aileron trim servo, and also drilled and mounted the |
|
| Shadin OAT sensor in the second wing access panel outboard from the fuse. spent some time ordering some connections and |
|
| additional shielded strobe cable, which should arrive next week. |
|
