| I've spent a lot of time the past couple of weeks in planning my panel and electrical system. I'm going w the Z14 dual |
|
| alternator/dual battery from Aero Electric connection. I've ordered all of the radios, EFIS, Alternator, switchs and other stuff to get |
|
| the wiring done. It shouls all arrive this week! Meanwhile Patrick and I temporarily installed the HS and elevators to see if I would |
|
| have a problem with the CH control grips when it hit the elevator stops. Turns out that I still have an interference problem with |
|
| the panel. the upright portion of the grip needs to be rotated back (aft) about 20-22 degrees so that the top of the GH grips will |
|
| clear the panel. So Today, I cut off the metal grip handle, and cround/filed the control stick to provide the 20 degree angle, then I |
|
| took them to Bill who TIG welded them, they turned out nice, he only wanted 10$, but it was worth at lest 20$ to me!. Got them |
|
| home and cleaned up the bottoms to look a little more streamlined. With the bottoms cut on an angle, I think I can drill/grind a |
|
| nole in the curved portion so that I don't have to drill a hole from the rear. We'll see/ One more day and Pat an I leave for OSH!! |
|
