| Finished the initial filling and sanding with the filler material. Gace everything a cood sanding w 100 grit, blew everything off, |
|
| wiped it all clean from dust and then sprayed on the 1st coat of UV Smooth Prime. Gary Specter put me on to this product, and a |
|
| I ever glad he did. It's a water based final filler, uv protection and primer all in one. It is extremely sandable. you can apply it by |
|
| rolling it on or with a sprayer. I chose to spray it on. the directions say to spray 3 light coats, waiting between coats for it to dry to |
|
| the touch. If it gets 'wet' looking it will run 9I proved that several times) My initial 3 coats were probably a little too heavy, But this |
|
| stuff sands so easily that it not really a problem. I got an initial coat on the entire structure and sanded the front 1/2 w/ 150 grit, |
|
| then reapplied a second coat. Ran out of daylight so i'll let that dry and then sand and finish the remainder tomorrow. |
|
