Bent the Aft Fuse skins both L&R. The plans don't say anything about bending the Left (but it's just a repeat of the Right, after |
|
the confusion with the .063 angle, remade the construction angles out of .125 and the bend went right in. It takes a pretty good |
|
twist to get to 60 degrees, and After clecoing on the skins to the fuse it probably could go a little past 60, I added 5 degrees for |
|
the Left and that was still a little shy. All in all it went much easier that I had heard, after fretting over the Righs skin, the Left went |
|
|