| Finished fitting and installing the lens covers and also installed the Bob Archer Nav Antenna. Pretty straight forward, just need to |
|
| be careful riveting the nutplates so as not to crack/chip the fiberglass. I decided to add 2 additional nutplates to both the top and |
|
| bottom of each wing tip. The Bob Archer Nav antenna is also a straight forward install, I needed to remove and reinstall 5 |
|
| nutplates, also removed the holddown clamps as They won't be needed. The pic's don't show it, but I made foam wedges/inserts |
|
| to fill the gap between the antenna and the wing tip, so that the antenna is flat. I installed these with GOOP, I believe it should be |
|
| sufficient, if it doesn't hold after cured. i'll put a strip of fiberglass cloth across them in a couple of places. |
|
