Dissassembled the ribs spars, hinges, etc. and deburred, dimpled, and scotchbrited everything except skins. I may be the only |
|
one who found this out this late, but if you are priming your parts, it's much easier to do the scotchbrit rough up before dimpling |
|
than after (duh!). Also Countersunk the trailing edges for both flaps. Tomorrow scotchbrite, dimple skins, and clean and prime |
|
(Hopefully it will be warm enough). Some of the ribs couldn't be dimpled with the squeezer. I made my own vice grip dimpler by |
|
taking an existing pair of vice grips and drilling a hole in each jaw the same size ad the dimple dies. Then insert the dies into |
|
each jaw and away you go. Picture # 3 show the jaws, theres' an additional pictire in the photo album on the web site. |
|