Finished sanding, deburring the stiffeners, then clecoed everything together and match drilled, then did the disassemble, and |
|
the deburred the skin holes and edges, put slight bend in the trailing edge, dimpled the skin to stiffener holes and all of the |
|
stiffeners, Scotchbrite the stiffeners and the skins. Primed same. (This time I used Sherwin williams rattle can 988, it went |
|
really fast and didn't have to wait too long to dry, then back riveted the stiffeners to the skins. A little tricky to get the skins |
|
oriented the right way and the stiffeners on the right side of the skins |
|