Finished riveting the Left wing skin, the last couple of bays go faster and easier than the previous 12-13, Judy helped in one |
|
section where it was a bit of a reach. Added the nutplates to the inboard rib and finished that off. Needed to reinstall the Gretz |
|
Pitot tube and reconnect the pitot line and the wiring, replaced the screws in the control module for 3/4 in as the 1/2 in screws |
|
only left a thread or so exposed on the other side of the nutplate. Secured all of the wiring and the pitot line and retested with the |
|
|